TBT30962004铁道货车超偏载检测装置.pdf

ICS03.220.30
s93TB
中华人民共和国铁道行业标准

TB/T3096-2004

铁道货车超偏载检测装置

DetectingDeviceforOverloadandUnbalance
LoadofRailWagons

2004-04-22发布2004-11-01实施

中华少L民共和国铁道部发布
TB/T3096-2004

目次

前言·.................................................................................................................II
1范围·..............................................................................................................1
2规范性引用文件···························································································⋯⋯1
3术语和定义·································································································⋯⋯1
4基本要求·····························································，··········································⋯⋯1
5技术条件·······································································································⋯⋯2
6试验方法·······································。····························································⋯⋯3
7检验规则····，·························································································，·········⋯⋯5
8标志、包装、运输、贮存·························································································⋯⋯6
附录A(资料性附录)超偏载测试数据统计方法·························································⋯⋯7
附录B(资料性附录)检衡车硅码分布尺寸图·········································，·····················⋯⋯9

www.bzfxw.com
TB/T3096-2004

前言

本标准在分度值、最大允许误差等方面参照了国际法制计量组织(OIML)国际建议R106-1“自动
轨道衡”。
标准由铁本道部标准计量研究所提出。
标准由铁本道部标准计量研究所归口。
本标准起草单位:国家轨道衡计量站、柳州铁路局科研所、北京华横新技术开发公司、成都货安计量
技术中心、北京东方瑞威科技发展有限公司。
标准主本要起草人:张一兵、陆霖、何小菊、王行方、徐海贤、李世林、孙熊岳、高占。
标准为本首次发布。

www.bzfxw.com
TR/T3096-2004

铁道货车超偏载检测装置

1范围

定了铁道货车超偏载检测本标准规装置(以下简称“检测装置，’)的术语和定义、基本要求、技术条
件、试验方法、检验规则和标志、包装、运输、贮存。
标准适用本于检测装置的制造、安装和试验。

2规范性引用文件
件中的条款通过本标准下列文的引用而成为本标准条款。凡是注日期的引用文件，其随后所有的
修改单(不包括勘误的内容)或修订版均不适用于本部分，然而，鼓励根据本标准达成协议的各方研究是
否可使用这些文件的最新版本。凡是不注日期的引用文件，其最新版本适用于本标准。
GB191包装储运图示标志
GB/T2423.1-2001电工电子产品环境试验第1部分:试验方法试验A:低温
G日/T2423.2-2001电工电子产品环境试验第2部分:试验方法试验B:高温
GB/T1993电工电子产品基本环境试验规程2423.3