华为交换机配置.docx

华为[S3526]交换机配置命令
首先通过配置线连接电脑与交换机的console口，在电脑上按以下步骤打开超级终端连接交换机：开始--程序--附件--通讯--超级终端
连接选择COM口

选择还原默认值，按确定，即可与交换机交互
视图设置：
<S3526>·······················接入交换机既进入用户视图，可查看交换机运行状态
<S3526>system-view··························进入系统视图
[S3526]··························系统视图，可进行系统参数配置
[S3526]quit··························返回用户视图
<S3526>

还原出厂设置：
只能在用户视图下

<S3526>resetsaved-configuration····························清除交换机配置文件

Thiswilldeletetheconfigurationintheflashmemory.
Theswitchconfigurationswillbeerasedtoreconfigure.
Areyousure?[Y/N]·······················输入Y，按回车确认清除交换机配置

<S3526>reboot·······················重启交换机

ThiswillrebootSwitch.Continue?[Y/N]················输入Y，按回车确认重启

三、保存命令：
<S3526>save····························只能在用户视图下save保存数据

Thiswillsavetheconfigurationintheflashmemory.
Theswitchconfigurationswillbewrittentoflash.
Areyousure?[Y/N]······························输入Y，按回车确认

当完成交换机配置后一定要记得save保存

四、交换机命名
<S3526>system-view··························进入系统视图
[S3526]sysnameBOSS····················在系统视图下将交换机名字命名为BOSS
[BOSS]························交换机名字已更改为BOSS

五、设置管理ip
[BOSS]intvlan1·················进入vlan1端口
[BOSS-Vlan-interface1]5.0·············设置管理ip
删除管理vlan和ip
[BOSS]intvlan1·················进入vlan1端口
[BOSS-Vlan-interface1]undo
[BOSS]undointvlan1

六、查看信息

[BOSS]discurr································查看全部配置信息
#
sysnameQuidway
#
radiusschemesystem
server-typehuawei
primaryauthentication127.0.0.11645
primaryaccounting127.0.0.11646
user-name-formatwithout-domain

domaindefaultenablesystem
#
local-servernas-ip127.0.0.1keyhuawei
#
queue-schedulerwrr1248
#
vlan1
#
vlan25
descriptionboss
#
descriptioncmnet
#
interfaceVlan-interface1
#
interfaceAux0/0
#
interfaceEthernet0/1
descriptionup-to-608
portlink-typetrunk
undoporttrunkpermitvlan1
porttrunkpermitvlan18254010173880099510421116
…………………………………………
…………………………………………
…………………………………………

查看端口信息

[BOSS]discurintEthernet0/2
#
interfaceEthernet0/2
descriptiontolisi·······················对此端口的描述，描述为to李四
duplexfull··············