凯泉XBD-DX系列多级离心消防泵.pdf

XBD-DX系列多级消防泵

目目录录

一、XBD-DX立式高速多级冲压消防泵结构图（65～100）···············1

二、XBD-DX立式高速多级冲压消防泵结构图（125、150）···············2

三、产品概述···········································3

四、工作条件···········································3

五、型号说明···········································3

六、标准配置···········································4

七、进出口相对位置······································4

八、水泵转向···········································4

九、结构安装型式········································4

十、电动机············································5

十一、轴封············································5

十二、型谱图···········································5

十三、XBD**/10-65DX技术数据·······························6

十四、XBD**/15-80DX技术数据·······························7

十五、XBD**/20-100DX技术数据·······························8

十六、XBD**/25-100DX技术数据·······························9

十七、XBD**/30-125DX技术数据·······························10

十八、XBD**/35-125DX技术数据······························11

十九、XBD**/40-150DX技术数据······························12

二十、XBD**/45-150DX技术数据·······························13

二十一、柔性安装基础尺寸图·································14

2
ALLTHERIGHTTOALTERTECHNOLOGYDOCUMENTSRESERVED保留技术更改的权利

XBD—DX系列高速多级冲压离心消防泵，是我公司根据市场需要而开发的新产品。其性能、
技术条件符合国家新颁布的GB6245-1998《消防泵性能要求和试验方法》标准的要求。
XBD—DX系列高速多级冲压离心消防泵产品达到国内领先水平，具有占地面积小，重量轻，
性能优良，运行可靠之优点。
XBD—DX系列高速多级冲压离心消防泵叶轮用不锈钢板冲压焊接而成，流道光洁平整，效
率显著提高。
部分电机用特殊结构配制的轴承，运行可靠。

工作介质清水
电机转速2950r/min
液体温度≤800C
流量范围10～45L/s
压力范围0.38～2.1MPa
环境温度≤400C
海拔高度≤1000m

XBD14/30-125DX[-C-J]

消防泵
电动机
10倍的额定压力（MPa）
流量L/s
进出口法兰公称通径DN
DX高速多级冲压系列
进出口相对位置（1800为标准型可省略）
机械密封（无特殊要求可省略）

示例：XBD14/30-125DX，表示立式高速多级冲压离心消防泵，泵的出口压力为1.4MPa，流
量为30L/s，进出口法兰公称通径DN125，吸入、吐出口相对位置为1800，采用机械密封。

3
ALLTHERIGHTTOALTERTECHNOLOGYDOCUMENTSRESERVED保留技术更改的权利

泵过流部件材料为HT200，叶轮为不锈钢冲压叶轮，泵轴材料为不锈钢，吸入口、吐出口相
对位置为1800，机械密封，Y2系列电机。

从上往下看，以吸入口为基准，逆时针旋转。
A0°
B90°
C180°（吸入、吐出方向相反）基本型式（可省略）
D270°
2级不允许A（0°）
特别提示：2级时A（0°）进出口法兰重叠，无法安装。

立式：从电机风扇端朝泵看，为逆时针方向。

4
ALLTHERIGHTTOALTERTECHNOLOGYDOCUMENTS