预览加载中,请您耐心等待几秒...
1/3
2/3
3/3

在线预览结束,喜欢就下载吧,查找使用更方便

如果您无法下载资料,请参考说明:

1、部分资料下载需要金币,请确保您的账户上有足够的金币

2、已购买过的文档,再次下载不重复扣费

3、资料包下载后请先用软件解压,在使用对应软件打开

深圳市信驰达科技有限公司 1 BLE4.0Module/低功耗蓝牙(BLE4.0)透透透明透明明明传传传传输输输输模模模模块块块块 GeneralDescription TheCC2540moduleisacost-effective,low-power,truesystem-on-chip(SoC)for Bluetoothlowenergyapplications.ItenablesrobustBLEmasterorslavenodestobebuilt withverylowtotalbill-of-materialcosts.TheCC2540combinesanexcellentRF transceiverwithanindustry-standardenhanced8051MCU,in-systemprogrammable flashmemory,8-KBRAM,andmanyotherpowerfulsupportingfeaturesandperipherals. TheCC2540issuitableforsystemswhereverylowpowerconsumptionisrequired.Very low-powersleepmodesareavailable.Shorttransitiontimesbetweenoperatingmodes furtherenablelowpowerconsumption. FeaturesandBenefits BluetoothlowenergytechnologyCompatible ExcellentLinkBudget(upto97dB), EnablingLong-RangeApplications AccurateDigitalRSSI ComplianceWithFCC&CEstandard High-PerformanceandLow-Power8051MCUcore BatteryMonitorandTemperatureSensor SampleApplicationsandProfiles Full-SpeedUSBInterface AESSecurityCoprocessor Applications 2.4-GHzBluetoothlowenergySystems MobilePhoneAccessories SportsandLeisureEquipment ConsumerElectronics HumanInterfaceDevices(Keyboard,MouseRemoteControl) USBDongles HealthCareandMedical 深圳市信驰达科技有限公司 2 ITEMTESTREQUIREMENTREMARKS Voltagesupply2.0-3.6VDC Centerfrequency2400-2483.5MHzProgrammable Frequencyerror±20KHz ModulationO-QPSK Outputpower4.5dBmProgrammable Receivingsensitivity-93dBmHighgainMode Receivingcurrent24mAHighgainmode Receivingcurrent21mAStandardmode Transmittingcurrent35mATXPower4dBm Transmittingcurrent26mATXPower-6dBm SleepconsumptionAtpower 0.4uAConnection-lessstat mode3 Transmitdistance>50MBER<0.1% Antenna50ohm Temperaturerange-20-85°C modulesize15*25mm 接线方框图 DC+3v MCUUARTTXCC2540 计步器,UENBLE蓝牙手 心率等测量设备Ready模块机 Bluetooth RF GND 说明: 1.Ready,在设备准备好的时候置低,不使用时置高电平。 2.蓝牙模块常态处于休眠状态,当Ready为低,开始广播,等待手机对接。 3.对接成功后,移动设备会有提示。 4.设备在对接成功后,每两秒给出一帧数据,如果校验正确,BLE模块则立即发送到手 机,否则放弃发送。 5.设备在发送串口数据之前,置低UEN,来唤醒CC2540,发送完毕之后抬高UEN. 6.设备置低UEN之后延时暂定500us,串口再发送数据。 深圳市信驰达科技有限公司 3 Ready UEN